|
|
DL2800 |
|
Number of channels
|
32 channels (16 slots) + 16 digital input (mainframe) |
|
Storage device
|
|
Internal memory: 32MW, Built-in
HDD: 40GB (inc. system domain 5GB) USB memory using the USB port
|
|
Interfaces |
Ethernet (10BASE-T/100BASE-TX):
for control with communication command (Std)
USB: Mouse, USB memory, 2 ports
(Std)
RS-232C: for control by
communication command or UPS shut-down (opt)
|
|
Sampling speed |
Max 2µS (500KS/s) ** Depends on AP module and No. of channels |
|
Measuring mode |
Selectable: Memory
Recorder, HDD Recorder and Multi Recorder Modes |
|
Memory mode |
Records measured data into internal memory by set trigger. For fast
events. |
|
Memory capacity |
32MW (1MW per
channel when using 32 channels) |
|
Memory division |
1, 2, 4, 8, 16, 32, 64, 128 divisions |
|
Measuring operation |
One time, repeat,
endless |
|
HDD recorder mode |
Records measured
data on HDD at Real-time. For long-term measurements. |
|
HDD capacity |
Max. 35GB |
|
Start condition |
Start key or Start time |
|
Measuring operation |
Normal or ring (repeat recording at set time period) |
|
Recording method |
Sample: record data at set
sampling speed.
Peak: record max and min value
at every 2µS sampling during set recording period.
|
|
Multi recorder mode |
Combination of memory & HDD recording. Steady state and transient
events can be recorded at same time. |
|
Monitor output |
XGA (analog RGB, 1024 x 768 dots) |
|
Operating environment |
5 to 40°C, 35 to 80%RH (without condensation). Humidity must be
45%RH or lower if temperature is 30°C or over. |
|
Power supply |
90 to 264VAC, 50/60Hz |
|
Power consumption |
Max. approx.
170VAC (When using USB and 16 AP11-103's installed) |
|
Dimensions |
Approx. 431 (W) x 244 (H) x 307 (D) (Pads on corners included but no
other projections) |
|
Weight |
Mainframe: 10.5Kg or less
Mainframe, 1 optional unit & 12
AP11-101's: 13.5Kg or less
|
