|
| |
NEC DF1100 SFSolution Analyzer
|
|
|
|
Item |
Model |
Description |
| 2ch High
Resolution DC Amp |
AP11-101 |
±100mV to ±500V, A/D: 16 bits, DC to 50KHz |
|
2ch FFT Amp |
AP11-102 |
Anti-aliasing filter (72dB/OCT), with PSU for sensor |
|
2ch High Speed DC Amp |
AP11-103 |
±100mV to ±500V, A/D: 12 bits, DC to 400KHz |
|
2ch AC Strain Amp *1 |
AP11-104A |
Frequency characteristics: 2KHz, Bridge power: 5KHz |
|
Event Amp |
AP11-105 |
8 logic inputs (Voltage/Contact) |
|
2ch TC/DC Amp |
AP11-106A |
R, T, J, K, W, (±10mV to ±50V), A/D: 15 bits, DC to 40KHz |
|
TC/DC Amp |
AP11-107 |
R, T, J, K, (10mV to ±50V), A/D: 14 bits, DC to 40KHz |
|
F/V Amp |
AP11-108 |
1Hz to 10KHz, ±100VDC, A/D: 16 bits |
|
2ch Vibration/RMS Amp |
AP11-109 |
±100mV to ±500V, with 18V power
supply for sensor.
RMS: 40Hz to 20KHz
|
|
2ch DC Strain Amp |
AP11-110 |
800µε to 20Kµε (BV=5V), 2Kµε to 50Kµε (BV=2V) |
|
2ch Zero Suppression Amp |
AP11-111 |
±100mV to ±500V, A/D: 16 bits, DC
to 5KHZ. Suppression voltage ±13V or ±110V (range dependant) |
|
|
*1 Optional AC Bridge Power Unit (RA23-116)
is required. |
|
|
|
|
|
